Small Block "212" PowerPack Deluxe.
Jackshaft and Battery Mount Ready...
PowerPack "Lite" Engine/Gearbox Mounting Bracket Kit
The PowerPack "Lite" will mount your 30 Series Reverse gearbox, 212 class engine, and a set of 30 series CVT clutches into a stand alone drive module ready for mounting into your project. At only 8" tall, the small block PowerPacks can be adapted into almost any project.
PowerPack "Deluxe" Engine/Gearbox Mounting Bracket
​The PowerPack Deluxe has all the great features of the PowerPack Lite, and adds two handy options:
This Deluxe model also provides a built in jackshaft and battery mount.
The jackshaft kit runs direct from the gearbox and will multiply your gear reduction 3X before for stump pulling torque:
A 24:1 ratio can be had with a 12/78 #35 sprocket set using the jackshaft kit and the gearbox's built in 1.26 reduction.
The jackshaft kit is Ideal for turning large tires, slow speed high torque loads, or you can use the built in 3X reduction into your add more ground clearance at your rear sprocket.
With a 3:1 reduction, you can reduce your final drive ratio, maximizing clearance at the rear sprocket.
The jackshaft kit is also handy for moving your drive sprocket on the right side or even in the center of the PowerPack providing some chain placement options for your custom installation.
The battery kit, will mount your YTX-9 battery right up under the starter for a super clean install.
